Unilock No-Rise Feedneck Item details: Nummech's Unilock feedneck is a wide-range clamping feedneck system compatible with many markers utilizing a latching body mount (Empire, Eclipse, Bob Long, Field-One, and others). The Unilock clamping system features a separate "lockring" collar which allows the assembly to be drastically stronger than stock one-piece feednecks.

Nummech manufactures two versions of the Unilock feedneck design. This "No-Rise" version is shorter in height to create a lower hopper profile. The effective clamping height is so short that you may need to shorten your hopper's feedtube to match the No-Rise clamping height (see below). An alternative standard height high-strength Unilock is also available. If you are unsure which feedneck is ideal for your particular marker, we suggest using the high-strength version for optimal reliability (as there is no need to modify your hopper).

Clamping heights:
Unilock No-Rise feedneck with Empire mount: 5/8" or 16-mm of the hopper will be held in the feedneck.
Unilock No-Rise feedneck with BLAST mount: 5/8" or 16-mm of the hopper will be held in the feedneck.
Unilock No-Rise feedneck with Eclipse mount: 1/2" or 12-mm of the hopper will be held in the feedneck.
Unilock High-strength feedneck with Empire mount: 3/4" or 19-mm of the hopper will be held in the feedneck.
Unilock High-strength feedneck with BLAST mount: 3/4" or 19-mm of the hopper will be held in the feedneck.
Unilock High-strength feedneck with Eclipse mount: 5/8" or 16-mm of the hopper will be held in the feedneck.

Unilock No-rise feedneck Unilock No-rise feedneck Unilock No-rise feedneck Unilock feedneck Unilock No-rise feedneck Unilock height comparison

Threaded boss adapters are available for many markers utilizing threaded feedports.

    Features:
  • Tool-free clamping lever operation
  • Lockring design allows for a greater clamping range compared to one-piece feednecks
  • Tool-free clamp adjustment thumbscrew (as of November 2016)
  • No-rise feedneck features a drastically reduced low-profile design compared to stock/OEM feednecks (may require modification to your hopper)
  • Stainless steel threaded roll nut
  • Stress-relieved clamping ribs
  • Failsafe cam lever stays closed even under force
  • Compatible with any boss-latch mount made to Empire's spec, Eclipse markers made after 2007, or Shocker RSX
  • Bob Long BLAST feednecks are compatible with gen-6 G6R, Onslaught, Insight, VCOM, and MVP.
  • Machined from solid billet aluminum 6061-T6 and plated with type-2 anodizing
  • Lifetime limited warranty included
    Included in the package:
  • Unilock feedneck
  • Plastic shim tool for installation
  • Installation instructions
Empire/Eclipse:    
BLAST/Field-one:    

Note: Delivery times are not guaranteed. Tracking is only available for shipments within the United States.

Content corner