corner homenews productsaccessories supporttech info dealersbuy online contactsend a msg aboutour company Nummech division of Mechanized Numerics LLC

Telos Autococker Roller Trigger Item details: Nummech's Telos slide trigger is based on the classic Worr design with devastating enhancements. The top surface has been outfitted with a set of roller bearings, allowing for the ultimate in friction reduction. Roller bearings further allow the hammer to be dropped quicker, though a more aggressive trigger ramp angle. We highly recommend pairing this trigger with a roller sear, which creates an effortless trigger stroke with virtually any spring combination.

The manufacturing process for Telos triggers is highly developed. They begin as a specialized Nickel-Chromium stainless steel alloy which is EDM-machined for each trigger, maintaining perfect alignment between the lower ridge and upper bearings. Afterward the trigger is stress relieved then precision surface ground to be smooth as glass. This unique manufacturing method creates a deadly combination of materials science with cutting-edge design.

Compatibility: Telos slide triggers are designed to be compatible with typical 2k-style slide frames. The grip frames must have bottom ridge adjustment set screws.
This trigger will not fit a Resurrection-style frame.

Telos roller trigger Telos roller trigger

    Features:
  • Drop-in upgrade for 1998+ style WGP-spec slider frames
  • Trigger nominal width of 0.161 inches
  • Compatible with WGP era trigger shoes and sears
  • Dual low-friction roller bearings on upper surface
  • Reduced side-to-side trigger slop when installed
  • Aggressive sear activation ramp angle (+4 degrees higher than a standard WGP ramp)
  • Round timing rod hole
  • Internally milled for weight reduction
  • Precision surface ground on each side
  • EDM machined from solid nickel-chromium stainless alloy
  • Unique material is highly resistant to rust and other corrosion
  • Lifetime limited warranty included
    Included in the package:
  • Telos roller trigger plate
  • Installation instructions

Telos Autococker Roller Trigger -Typical color/finish options: RAW STAINLESS
-The item is in stock if you are able to add-to-cart below. If not then the item is backordered.

Status: Out of stock

Note: Delivery times are not guaranteed. Tracking is only available for shipments within the United States.

Related links:

Instructions: Telos roller trigger/sear
Roller trigger/sear Installation instructions
Replacement hardware: Telos roller trigger/sear
Item: Description: Price/each: Diagram:
Roller bearing Ball bearing; 4mm OD, 1.5mm ID $3.50 (Contact us to buy) Telos roller trigger plate diagram
Bearing pin Pin; 1.5mm OD, 4mm length, high carbon alloy steel $0.99 (Contact us to buy)
Description of production changes: Telos roller trigger/sear
Batch 1 (2018): First batch. The triggers have two large milled cutouts for weight reduction. This batch included only 2k-style triggers and were included with our Nummech Nautococker frames. Triggers were surface-ground on the sides, but they were not polished beyond grinding.
Batch 2 (2021): "Version 2" Telos plates were revised with a different visual design that aids in the manufacturing process across different styles. The new batch has slightly different engraving by stating +4? instead of simply "4" which indicates the sear ramp angle. Version-2 triggers have drilled holes instead of milled cutouts. The drilled holes make our manufacturing process easier, and the overall weight of the trigger is nearly identical. The trigger linkage hole is now slightly taller oval cut to allow greater compatibility with oddball frames/bodies that position their 3-way in a different height. All version-2 triggers were polished from the factory, in addition to being surface-ground like the previous batch. Lastly, a set screw hole was added to restrict travel with pump markers, or allow the player to eliminate linkage slop with an Autococker.
Content corner